Ford Explorer (1995-2003) Sport Oil Pressure Sensor DIY




Replace the Oil Pressure Sensor on a 1995-2003 (Second Generation) Ford Explorer

Works For:
1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Ford Explorer Sport Models

Source: ExplorerForum

Whenever I started my 2001 Explorer Sport the oil pressure gauge sat at zero (which is quite scary) until a few minutes later when the gauge jumps up to a normal reading.

Since there was no pinging and my Explorer hadn’t exploded I decided it was probably the oil pressure sensor.

Go to FORD to fix it? F-that.

Fix it yourself for $15 and 20 mins of your time:

Start by taking the drivers side tire off and peeling back the small upper bit of the rubber wheelwell

Look in from the wheel well. This is the culprit with the single white/green wire comming out of it. Start by unplugging the connector.

Unplug that sucker and unscrew it using a deep socket.

Old and new. Screw it in using your hand first, then tighten with a wrench. Put everything back in reverse order (plug it back in, replace the wheel well, put on your tire, etc.)

The gauge pops right up every time you start it up. Problem fixed.





View More Ford Explorer DIY's

You can leave a response, or trackback from your own site.

Leave a Reply

Powered by WordPress